Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Crystal growth of selected II–VI semiconducting alloys by directional solidification: Part I Ground-based experiments

A series of Hg_0.84Zn_0.16 Te crystal ingots have been grown from pseudobinary melts by the Bridgmam–Stockbarger type directional solidification using a Marshall Space Flight Center/Space Science Laboratory heat-pipe furnace and the ground control experiment laboratory furnace of the crystal growth furnace which was flown on the first United States Microgravity Mission. A number of translation rates and a series of hot- and cold-zone temperatures were employed to assess the influence of growth parameters on the crystal properties for the purpose of optimizing the in-flight growth conditions. This revised version was published online in November 2006 with corrections to the Cover Date.     

Study and design of step-index channel waveguide bends withlarge-angle and low-loss characteristics

By using micro-prisms, improved three-dimensional (3-D) bends of the embedded and buried waveguides of step-index profile are proposed. A simple phase compensation rule for the optimal design of the micro-prism is also presented. Through the simulation of 3-D semivectorial finite-difference beam propagation method, the transmission characteristics of the improved bends are shown to have been enhanced dramatically as compared with those of the conventional ones. Even for a bend angle of as large as 10°, the normalized transmitted power can still be greater than 95%. These results of 3-D bends are then compared with those of the two-dimensional (2-D) ones which are simplified from 3-D structures by the effective index method, and physical explanation of the discrepancy between the 3-D and 2-D results is introduced. The influences of waveguide structures and prism parameters on the transmission characteristics are discussed in detail. Some criteria for the design of large-angle low-loss 3-D improved bends are also accessed     

用流式细胞计数仪检测不同辐射剂量诱导的小鼠胸腺细胞程序性死亡

用流式细胞计数仪检测不同辐射剂量诱导的小鼠胸腺细胞程序性死亡苏旭，张迎春，刘树铮（白求恩医科大学卫生部放射生物实验室，长春１３００２１）关键词程序性细胞死亡，流式细胞术，胸腺细胞，Ｘ射线自Ｗｙｌｌｉｅ等’‘’对程序性细胞死亡（ＰＣＤ），又名细胞凋亡（...     

行波管质量与可靠性信息管理系统的设计

本文从应用角度简要介绍了《行波管质量与可靠性信息管理系统》的研制背景，数据库的数据来源，数据结构，系统构成及功能特点。     

我国清洁代用燃料汽车发展状况

随着汽车数量的迅速增加，汽车排放的有害废气也急剧增加，人们的健康受到威胁，解决这一问题的最好办法是发展清洁代用燃料汽车。介绍了天然气汽车和液化石油气汽车的主要优点，分析了目前我国清洁代用燃料汽车的发展现状，阐述了近期适宜发展我国清洁代用燃料汽车的机遇和面临的困难。最后就提高人们的环保意识、修改和完善汽车尾气污染控制法及排放标准、清洁代用燃料汽车的有关标准和安全措施。对发展这种汽车应给予优惠政策以及零部件生产和车辆改装企业的管理等方面，提出了建议。     

A tutorial on wavelets from an electrical engineering perspective.I. Discrete wavelet techniques

The objective of this paper is to present the subject of wavelets from a filter-theory perspective, which is quite familiar to electrical engineers. Such a presentation provides both physical and mathematical insights into the problem. It is shown that taking the discrete wavelet transform of a function is equivalent to filtering it by a bank of constant-Q filters, the non-overlapping bandwidths of which differ by an octave. The discrete wavelets are presented, and a recipe is provided for generating such entities. One of the goals of this tutorial is to illustrate how the wavelet decomposition is carried out, starting from the fundamentals, and how the scaling functions and wavelets are generated from the filter-theory perspective. Examples (including image compression) are presented to illustrate the class of problems for which the discrete wavelet techniques are ideally suited. It is interesting to note that it is not necessary to generate the wavelets or the scaling functions in order to implement the discrete wavelet transform. Finally, it is shown how wavelet techniques can be used to solve operator/matrix equations. It is shown that the “orthogonal-transform property” of the discrete wavelet techniques does not hold in numerical computations     

A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers

In this study, a damage identification approach was developed for carbon fibre/epoxy composite laminates with localized internal delamination. Propagation of the Lamb wave in laminates and its interaction with the delamination were examined. The fundamental symmetric Lamb wave mode, S₀, and the lowest order shear wave mode, S₀^′, were chosen to predict damage location. A real-time active diagnosis system was therefore established. This technique uses distributed piezoelectric transducers to generate and monitor the ultrasonic Lamb wave with narrowband frequency. The two-way switches were employed to minimize the number of transducers. A signal-processing scheme based on the time–frequency spectrographic analysis was utilised to extract useful diagnostic information. Also, an optimal identification method was applied on damage searching procedure to reduce errors and obtain the diagnostic results promptly. Experiments were conducted on [0/−45/45/90]_s CF/EP laminates to verify this diagnosis system. The results obtained show that satisfactory detection accuracy could be achieved.     

单模光纤最小群速度色散波长附近的调制不稳定性

利用修正的非线性Ｓｃｈｒｏｄｉｎｇｅｒ方程研究了单模光纤最小群速度色散波长附近的调制不稳定性，发现了一个新的由光纤四色散导致的调制不稳定性区域，该区域的调制范围与初始入射脉冲的功率和四阶色散有关。     

帧中继交换技术

本文论述了帧中继交换的概念、标准，结构、特点网络式样及在互连网中的应用。